For homes and rentals
Mold in a home or rental affects your family or tenants. We inspect, contain, and remove mold from living spaces, attics, and crawl spaces.
- Musty odors in living areas
- Roof leaks soaking ceilings
- Plumbing leaks behind walls
Commercial Mold Remediation in Dallas that keeps your business open
Commercial Mold Remediation in Dallas is built for property managers, restaurant owners, and facility directors who cannot afford a shutdown. We locate the moisture source, contain the affected area, and remove mold from drywall, ceilings, and HVAC systems. Our team works after hours when needed, documents every step, and leaves you with a space that passes inspection and is ready for staff and customers.
Moisture mappingContainment setupClearance testing- We inspect firstFind the source before removal
- We contain the areaSeal the zone, protect clean spaces
- We document everythingPhotos, readings, lab results
- We work after hoursSchedule around your business
What our commercial mold remediation service includes
Every commercial job includes inspection, containment, removal, cleaning, and documentation. We tell you upfront what is covered and what depends on the condition of your building. No surprises, no hidden add-ons.
Full mold inspection and moisture mapping
We use thermal imaging cameras, moisture meters, and a boroscope to find every affected area. Air samples go to a lab when needed. You get a written report with photos and moisture readings within 24 hours.
Containment and negative air setup
We build sealed work zones with polyethylene sheeting and duct sealant. Negative air machines and air scrubbers with HEPA filters run during the entire job. This protects clean areas of your building from cross-contamination.
Mold removal and material disposal
We remove moldy drywall, insulation, ceiling tiles, and other porous materials. HEPA vacuums capture surface spores. All debris is bagged and disposed of according to Texas regulations. We treat framing with Fiberlock or Concrobium.
Antimicrobial treatment and encapsulation
After removal, we apply antimicrobial spray and encapsulation coating to wood framing, concrete, and ductwork. A fogger reaches ceiling cavities and other tight spaces. This stops mold from regrowing on surfaces that stay.
Final clearance testing and documentation
We take final air samples and moisture readings. If the lab clears the space, we remove containment. You get a photo log, lab results, and a written summary of the moisture source so you can schedule repairs.
Reconstruction with mold-resistant materials
We install mold-resistant drywall and rebuild what we removed. The finish matches your existing space. Most commercial jobs are ready for business within 3 to 7 days from start to finish.
Homes and businesses.
The approach is the same for a home and a business. What changes is the access, the schedule and who needs the paperwork.
For businesses and properties
Mold in a commercial space affects operations, tenants, and inspections. We work after hours and document everything for your records.
- Mold in office suites
- Restaurant prep line leaks
- Warehouse humidity and shelving
What Commercial Mold Remediation in Dallas actually involves
A plain-language look at what Commercial Mold Remediation involves and when it is needed.
See how it worksCommercial Mold Remediation in Dallas is the process of finding mold growth in a business, stopping the moisture that feeds it, and removing contaminated materials without spreading spores to clean areas. We set up polyethylene sheeting and negative air machines to keep the work zone sealed. Air scrubbers with HEPA filters run continuously. We use thermal imaging cameras and moisture meters to trace hidden water, then remove mold from drywall, insulation, ceiling tiles, and ductwork. Every surface gets an antimicrobial spray or encapsulation coating before we rebuild.
Dallas businesses call us for the same handful of reasons. A roof leak soaks ceiling tiles in a retail store. A plumbing leak behind a restaurant prep line feeds black mold for weeks before anyone notices. High humidity and condensation in a warehouse keep shelving and pallets damp year-round. When you search for commercial mold remediation near me Dallas TX, you want a crew that understands how quickly mold can shut down an inspection or sicken employees.
Fixing mold means fixing the water source first, then removing what is contaminated.
- What it is
- Finding mold in a commercial space, containing it, removing contaminated materials, and documenting clearance.
- When you need it
- When you see mold, smell musty odors, or find water damage that has been wet for more than 48 hours.
- What to expect
- Inspection, containment, removal, cleaning, clearance testing, and reconstruction with documentation for your records.
Our commercial mold remediation process, step by step
Every business mold remediation Dallas TX project follows the same five steps. You will know what is happening, who is doing it, and how long it takes before we start.
-
Inspection and testing
We walk the property with thermal imaging cameras, moisture meters, and a boroscope to find hidden mold and water. Air samples go to a lab when needed. You get a written report within 24 hours that shows affected areas, moisture readings, and the mold type. This is the commercial mold inspection Dallas TX step that tells us how big the job really is.
- Inspect
- Test
- Report
-
Containment and setup
We build a sealed work zone with polyethylene sheeting and duct sealant. Negative air machines pull air out of the containment so spores cannot escape. Air scrubbers with HEPA filters run 24 hours a day during the job. Setup takes 2 to 4 hours on a typical office or retail space.
- Seal
- Pressurize
- Filter
-
Mold removal
We remove moldy drywall, insulation, ceiling tiles, and any porous materials that cannot be saved. HEPA vacuums capture surface spores. We use Fiberlock and Concrobium products to treat framing and structural surfaces. A fogger applies antimicrobial spray to hard-to-reach areas like ductwork and ceiling cavities.
- Remove
- Vacuum
- Treat
-
Cleaning and verification
After removal, we clean every surface inside the containment with Benefect or RMR-86. Encapsulation coating goes on wood framing and concrete. We take final moisture readings and air samples. If the lab clears the space, we remove containment. If not, we repeat the cleaning step until it passes.
- Clean
- Verify
- Clear
-
Reconstruction and handoff
We install mold-resistant drywall and rebuild what we removed. You get a photo log, lab results, and a written summary of the moisture source so you can schedule the plumber or roofer. Most commercial jobs wrap in 3 to 7 days. Emergency commercial mold removal Dallas calls get same-day containment.
- Rebuild
- Document
- Handoff
Tools and methods we use for commercial mold remediation
Move across a circle, or focus it and press Enter, for an illustrative thermal view of the photograph.
Thermal imaging camera
Finds hidden moisture behind walls, above ceilings, and under floors without tearing anything open. We use it during every commercial mold inspection Dallas TX to map the full extent of the problem.
Moisture meter
Reads exact moisture content in drywall, wood, and concrete. We use it to confirm the source of the problem and to verify the space is dry before we close walls.
Negative air machine
Pulls air out of the containment zone so mold spores cannot escape into clean areas. We run these continuously during removal and cleaning.
Air scrubber with HEPA filter
Filters airborne spores and dust down to 0.3 microns. We place these inside the containment to keep the air clean and protect workers.
HEPA vacuum
Captures surface mold spores from framing, ducts, and hard surfaces without spreading them into the air. Standard equipment on every job.
Thermal views are illustrative, generated from the photographs.
Methods
Fogger
Applies antimicrobial spray to ceiling cavities, ductwork, and other tight spaces that are hard to reach by hand. Ensures full coverage after removal.
Boroscope
Lets us see inside wall cavities and ductwork without cutting large holes. We use it to confirm mold growth in hidden areas before we open them up.
IICRC S520 standard
This is the industry standard for mold remediation. It covers inspection, containment, removal, cleaning, and clearance. We follow it on every commercial job so your documentation stands up to insurance and inspection review.
Containment with negative air pressure
We seal the work zone with polyethylene sheeting and duct sealant, then pull air out with negative air machines. This keeps spores from spreading to clean areas of your building. It is the single most important step in preventing cross-contamination.
HEPA filtration and air scrubbing
Air scrubbers with HEPA filters run 24 hours a day during the job. They capture airborne spores and dust so the air inside the containment stays clean. This protects workers and speeds up clearance testing.
Antimicrobial treatment and encapsulation
After removal, we apply antimicrobial spray and encapsulation coating to framing, concrete, and ductwork. This stops mold from regrowing on surfaces that stay. We use Fiberlock, Concrobium, Benefect, and RMR-86 products depending on the surface.
When Dallas businesses need commercial mold remediation
Restaurant prep line
A restaurant in Deep Ellum finds black mold behind the prep line after a slow plumbing leak.
We contain the kitchen area overnight, remove moldy drywall and insulation, and treat framing with antimicrobial spray. The work happens after closing so lunch service is not affected. We document everything for the health inspector.
Outcome: The restaurant reopens the affected zone in 3 days. The health inspector passes the space without citations. The owner schedules a plumber to fix the leak before we close the wall.
Office ductwork
An office building in Uptown Dallas has musty odors in multiple suites from HVAC condensation.
We inspect the ductwork with a boroscope, find mold growth inside the system, and clean it with HEPA vacuums. A fogger applies antimicrobial spray to the ducts. We also check the HVAC units and tell the property manager what needs adjusting.
Outcome: Tenant complaints stop within a week. The property manager gets a documented report showing the mold is gone. The HVAC contractor fixes the condensation problem so it does not return.
Warehouse shelving
A warehouse in Pleasant Grove has mold on pallets and shelving from years of high humidity.
We set up containment around affected areas, run commercial dehumidifiers, and remove mold from shelving and walls. Inventory that can be saved gets cleaned and treated. Encapsulation coating goes on structural surfaces.
Outcome: The warehouse is dry and mold-free in 10 days. The manager installs humidity controls based on our recommendations. Six months later, no new mold growth.
Retail ceiling tiles
A retail store in Lakewood has moldy ceiling tiles from a roof leak after a spring storm.
We contain the sales floor section, remove moldy tiles and insulation, and treat the framing above. We tell the owner what the roofer needs to fix. New mold-resistant tiles go up after the leak is repaired.
Outcome: The store stays open during the work. The affected section is back to normal in 4 days. The owner has documentation for the insurance claim.
Medical office emergency
A medical office in Preston Hollow needs emergency mold removal after a pipe burst over the weekend.
We respond within 2 hours, contain the affected suites, and start water extraction and mold removal. Negative air machines and air scrubbers run continuously. We work around patient schedules to minimize disruption.
Outcome: The office reopens for patients in 5 days. Lab results confirm the space is clear. The practice manager gets a full documentation packet for the landlord and insurance.
How commercial mold remediation runs in Dallas
Dallas has a mold problem that comes from three directions: humidity, roof leaks, and HVAC condensation. Summer humidity sits above 60 percent for months, and commercial buildings with flat roofs leak every time a spring storm rolls through. We see mold in office buildings in Downtown Dallas, restaurants in Deep Ellum, warehouses in Pleasant Grove, and retail centers in Lakewood. The building stock matters too.
Older buildings in Oak Cliff and East Dallas often have original plumbing and inadequate ventilation. Newer construction in Uptown and Victory Park has tighter envelopes that trap moisture from HVAC systems. We handle commercial mold cleanup Dallas businesses need without shutting down operations. If you search for commercial mold remediation near me Dallas TX, you want a crew that knows how Dallas buildings fail.
We do.
- Deep Ellum: Older brick buildings with flat roofs and original plumbing. We see mold behind restaurant prep lines and in ceiling cavities after slow leaks.
- Uptown Dallas: Newer office towers with tight envelopes. HVAC condensation and ductwork mold are common when systems are not balanced properly.
- Pleasant Grove: Warehouses and industrial spaces with high humidity. Mold grows on shelving, pallets, and stored inventory without proper dehumidification.
- Oak Cliff: Mixed commercial and residential buildings, many with original plumbing. Slow leaks behind walls feed mold for weeks before anyone notices.
- Lakewood: Retail and restaurant spaces with flat roofs. Spring storms push water through roof membranes and soak ceiling tiles and insulation.
- Summer humidity above 60 percent for months: High humidity keeps commercial spaces damp and feeds mold on drywall, insulation, and stored materials. HVAC systems condense water and spread spores through ductwork. Dehumidification is often part of the fix.
We walk the space with you and explain what we find. We protect clean areas and set up containment. We schedule follow-up checks and review next steps.
From problem to finished result.
Restaurant prep line mold removal in Deep Ellum
Before: A slow plumbing leak behind the prep line fed black mold on drywall and baseboards for three weeks. The kitchen smelled musty, and the health inspector flagged it during a routine visit. The owner needed the problem fixed without closing for more than a day.
After: We contained the kitchen overnight, removed moldy drywall and insulation, and treated framing with antimicrobial spray. New mold-resistant drywall went up after the plumber fixed the leak. The health inspector cleared the space in 3 days. The restaurant did not lose a single lunch service.
The owner checks under the prep sink monthly for leaks and runs a dehumidifier during summer. We schedule a follow-up moisture check 6 months after the job.
Office ductwork mold cleanup in Uptown Dallas
Before: Tenants in a 4-suite office complained about musty odors for months. The property manager suspected HVAC mold but could not see inside the ducts. Air samples confirmed mold spores in three suites. The building owner wanted documentation before approving the work.
After: We inspected the ductwork with a boroscope, found mold growth inside two main trunk lines, and cleaned the system with HEPA vacuums. A fogger applied antimicrobial spray to the ducts. Lab results after cleaning showed spore counts below outdoor levels. Tenant complaints stopped within a week.
The property manager schedules HVAC inspections every spring and fall. We recommended balancing the system to prevent condensation. A follow-up air sample at 6 months confirmed the ducts stayed clean.
Warehouse mold removal in Pleasant Grove
Before: A 10,000-square-foot warehouse had mold on pallets, shelving, and walls from years of high humidity. Inventory in the affected area was damaged, and workers complained about the smell. The manager needed the space usable again without replacing everything.
After: We set up containment around affected areas, ran commercial dehumidifiers for 4 days, and removed mold from shelving and walls. Inventory that could be saved was cleaned and treated. Encapsulation coating went on structural surfaces. The warehouse was dry and mold-free in 10 days.
The manager installed humidity controls and monitors moisture levels weekly. We recommended annual inspections before summer humidity peaks. Six months later, no new mold growth.
Commercial mold problems we solve for Dallas businesses
Mold in a commercial space costs money, sick days, and tenant trust. Here are the problems we hear about most and how we fix them.
- Musty odorsMusty odors driving tenants and customers awayMusty odors signal mold even when you cannot see it. Tenants complain, customers leave, and employees worry about air quality. The problem gets worse as mold spreads through ductwork and wall cavities. We trace the odor to its source with thermal imaging cameras and moisture meters. Then we remove mold from the affected materials, clean the air with HEPA scrubbers, and treat surfaces with antimicrobial spray. The odor goes away because the mold goes away.
- Roof leaksRoof leaks soaking ceiling tiles and insulationDallas spring storms push water through flat roofs and around HVAC units. Wet ceiling tiles and insulation grow mold within 24 to 48 hours. If ignored, mold spreads to framing and ductwork above the ceiling. We contain the area, remove moldy tiles and insulation, and treat the framing above. We tell you exactly what your roofer needs to fix so the leak stops. Then we install mold-resistant materials and document the repair for your records.
- Plumbing leaksPlumbing leaks behind walls and under sinksA slow leak behind a restaurant prep line or office break room feeds black mold for weeks before anyone notices. By the time you see it, mold has spread to drywall, baseboards, and sometimes the floor structure. We open the wall, contain the mold, and remove affected drywall and insulation. Framing gets treated with encapsulation coating. We identify the leak source and tell you what your plumber needs to repair before we close the wall.
- HVAC moldHVAC condensation and ductwork moldDallas humidity makes HVAC systems condense water all summer. Mold grows inside ductwork and spreads spores to every room. Employees get sick, and the problem keeps coming back no matter how much you clean. We seal the duct system, clean it with HEPA vacuums, and apply antimicrobial spray. If ducts are too contaminated, we remove and replace affected sections. We also check the HVAC unit for condensation problems and tell you what needs adjusting.
- Warehouse humidityHigh humidity in warehouses and storage areasWarehouses without proper dehumidification stay damp year-round. Mold grows on pallets, shelving, and stored inventory. Products get damaged, and the mold keeps spreading no matter how many times you wipe it down. We run commercial dehumidifiers and air scrubbers to dry the space. Mold gets removed from shelving, walls, and inventory that can be saved. We apply encapsulation coating to structural surfaces and recommend humidity controls to prevent regrowth.
Why Dallas businesses choose professional commercial mold cleanup
A dry, documented, mold-free space that passes inspection and stays that way.
Faster return to operations
Most commercial mold cleanup Dallas jobs we handle let you reopen within 3 to 5 days, depending on square footage and how far the mold spread. We schedule work after hours or on weekends so your team does not lose a single business day. Restaurants stay closed only for the affected zone, not the whole building.
Documented clearance for inspectors
We provide photo logs, moisture readings, and a written scope of work. That documentation is what your insurance adjuster, health inspector, or landlord needs to see. It also protects you if a tenant or employee raises a concern later. Every commercial mold removal Dallas Texas project ends with a clear paper trail.
Containment that protects clean areas
We seal the work zone with polyethylene sheeting and run negative air machines so spores cannot travel to your sales floor, kitchen, or office suites. HEPA vacuums and air scrubbers capture particles down to 0.3 microns. Your inventory, files, and equipment stay protected while we work.
Moisture source fixed, not just mold wiped
We trace roof leaks, plumbing leaks, HVAC condensation, and high humidity with thermal imaging cameras and moisture meters. Then we tell you exactly what your plumber, roofer, or HVAC contractor needs to repair before we close the walls.
What you receive
Clear records you can keep and share.
Photo log
Before, during, and after photos
Moisture report
Readings from every affected area
Lab results
Air sample analysis before and after
Scope summary
Written record of work performed
Understanding mold in commercial spaces
Not all mold problems are the same. The type and extent of growth determines how we handle the job.
Surface mold
Growth on hard surfaces like concrete or framing.
- Can often be treated
- Less material removal
- Faster clearance
Porous material mold
Growth in drywall, insulation, or ceiling tiles.
- Materials must be removed
- More containment needed
- Reconstruction required
HVAC mold
Growth inside ductwork or air handlers.
- Spreads to all rooms
- Requires duct cleaning
- System balancing may be needed
Surfaces and systems we work with
- Drywall
- Insulation
- Ceiling tiles
- Ductwork
- Framing
- Concrete
- Baseboards
- Carpet
Service ZIP codes.
A list like this tells people straight away whether you cover their street. Not listed? Call and ask: it only takes a minute.
- 75098
- 75287
- 75230
- 75231
- 75236
- 75237
- 75235
- 75254
- 75251
- 75252
- 75253
- 75043
Towns we serve.
Based in Dallas and covering the places around it. Pick one for local details.
- Downtown Dallas
- Uptown Dallas
- Oak Lawn
- Deep Ellum
- Lakewood
- Bishop Arts District
- Design District
- Preston Hollow
- Knox-Henderson
- Trinity Groves
- Victory Park
- East Dallas
Frequently Asked Questions
The biggest cost drivers are square footage, how many materials need removal, and whether HVAC systems are contaminated. We give you a written scope and price before we start.
Most commercial jobs take 3 to 7 days from containment to clearance. A single office suite with 200 square feet of mold might finish in 2 to 3 days. A warehouse with 5,000 square feet of affected area can take 10 to 14 days. Lab results add 24 to 48 hours. We schedule work after hours when needed so your business keeps running. Emergency containment can start the same day you call.
Yes. We schedule containment, removal, and cleaning after hours, overnight, or on weekends for restaurants, retail stores, and offices. Most of our commercial clients prefer this because it avoids closing the business or disrupting tenants. We also handle emergency commercial mold removal Dallas calls when a roof leak or plumbing failure soaks a space and mold starts growing within 24 to 48 hours. Call (214) 817 0145 and we will set a time that works.
Related Services
Other services from the same team.
- Residential Mold RemediationFrom a single bathroom wall to a full attic, we handle residential mold remediation services Dallas homeowners need. We protect furniture and floors, contain the work area, and clean up daily. You get a written scope, photo documentation, and a post-remediation verification report.
- Apartment and Condo Mold RemediationMulti-unit buildings need coordination with property managers and tenants. We schedule around occupancy, contain each unit separately, and document everything for the HOA or management company. We also trace shared moisture sources like stack leaks and HVAC condensate lines.
- Mold Inspection and TestingWe use thermal imaging cameras, moisture meters, and boroscopes to find hidden moisture behind walls, under floors, and above ceilings. You get a written report with photos, lab results, and a clear scope of work before any remediation begins.
Get Commercial Mold Remediation in Dallas started today
Call (214) 817 0145 and we will schedule an inspection, give you a written scope, and contain the mold before it spreads. We work after hours for Dallas businesses and document everything for your records.
Contact Dallas Mold Remediation
Call (214) 817 0145 or email [email protected] to schedule an inspection. We answer the phone Monday through Friday, 8:00 AM to 6:00 PM, and we return after-hours messages first thing the next morning. Same-day inspections are available across Dallas County when you call before noon.