
For Highland Park Homes
We protect your family from mold spores. We contain the work area and clean the air.
- Historic homes
- Attics and crawl spaces
- HVAC systems
- Condos and apartments
Mold Remediation in Highland Park means protecting century-old homes and high-value properties from hidden moisture damage.
3102 Commerce St, Dallas, TX 75226, USA, Dallas, Texas

Serving Highland Park and nearby

Highland Park's historic homes and mature trees create unique moisture challenges. Many properties in 75205 and 75225 were built before modern vapor barriers, and our humid North Texas climate pushes indoor humidity above 60% for months at a time. That combination feeds black mold in attics, crawl spaces, and behind drywall. We've served the Park Cities since 2015, and we know how these older homes behave.
Our mold remediation services in Highland Park start with a thorough inspection using thermal imaging cameras and boroscopes to map moisture without tearing out walls. We then contain the affected area with polyethylene sheeting and negative air machines, remove mold-damaged materials, and treat surfaces with antimicrobial spray.
Every job follows IICRC WRT and AMRT standards, and we document everything for your insurance claim. Whether you're near Highland Park Village or closer to Southern Methodist University, we treat your home like it's our own.
Highland Park's housing stock is older, denser, and more valuable than most of Dallas. A single roof leak in a 1920s Tudor can spread mold through three rooms before you notice a musty odor. We serve this area because the demand for careful, code-compliant remediation is high, and homeowners here expect contractors who show up on time and communicate clearly. We've built our schedule around same-day inspections for the Park Cities because we know water damage doesn't wait.
Good to know in Highland Park
Indoor humidity in Highland Park often exceeds 60% during summer, and many pre-1950 homes lack modern moisture control. This creates ideal conditions for mold growth in attics, crawl spaces, and wall cavities.
This area near Highland Park Village has some of the oldest homes in the Park Cities, many built in the 1920s. Original plumbing and roof systems mean hidden leaks are common, and mold often grows behind plaster walls.
Live oaks and pecans around Highland Park drop leaves and branches that clog gutters and trap moisture on roofs. This leads to roof leaks and attic mold that homeowners don't see until it's widespread.
From black mold removal in historic homes to commercial mold removal in Highland Park TX, we handle every type of mold problem. If you've been searching for mold remediation near me Highland Park TX, we're local and ready to help.
We inspect Highland Park homes with thermal imaging cameras and moisture meters to find hidden mold. We test air and surface samples, then give you a written report with lab results.
Black mold removal in Highland Park TX requires careful containment.
Highland Park's older attics often lack proper ventilation, and roof leaks go unnoticed for months. We remove mold from roof sheathing, rafters, and insulation.
Many Park Cities homes have crawl spaces that trap moisture. We remove mold from joists and subfloor, install new vapor barriers, and set up dehumidifiers to keep humidity below 50%.
Basements in Highland Park can flood during heavy spring rains. We extract standing water, remove mold-damaged drywall, and treat concrete walls with encapsulation coating.
Mold in your HVAC system spreads spores through every room. We clean air handlers, coils, and ductwork with HEPA vacuums and antimicrobial spray.
We cut out mold-damaged drywall, treat the framing behind it, and install mold-resistant drywall. We match texture and paint so your walls look untouched.
Ductwork in older Highland Park homes collects dust and mold spores. We use HEPA vacuums and foggers to clean and sanitize every duct run.
After removing mold, we treat all surfaces with antimicrobial spray to stop regrowth. We use products like Fiberlock and Concrobium that are safe for families and pets.
We handle commercial mold removal in Highland Park TX for offices, retail spaces, and restaurants. We work after hours to avoid disrupting your business.
Residential mold remediation in Highland Park means protecting your family from mold spores. We contain the work area, remove mold, and clean the air with air scrubbers.
We work with condo owners and HOAs in Highland Park to remediate mold in shared walls and common areas. We coordinate with property managers and provide clearance testing.
Pick a service to see how we approach it here.
We inspect Highland Park homes with thermal imaging cameras and moisture meters. We check attics, crawl spaces, and walls for hidden moisture. We also take air samples to confirm mold types.

We contain black mold with polyethylene sheeting and negative air machines. We remove mold-damaged materials and HEPA vacuum all surfaces. We treat with antimicrobial spray.

We inspect attics with boroscopes to find mold behind insulation. We remove mold from sheathing and rafters. We also improve ventilation to prevent regrowth.

We remove mold from crawl space joists and subfloor. We install vapor barriers and dehumidifiers. We also seal foundation vents to block humid air.

How we handle homes and businesses in Highland Park

We protect your family from mold spores. We contain the work area and clean the air.

We work after hours to avoid disrupting your business. We document everything for property managers.
Highland Park's climate and housing stock create specific mold challenges. From high humidity to aging infrastructure, here's what we see most often.

Many Highland Park roofs are original or older, and mature trees drop debris that traps moisture. Poor attic ventilation keeps humidity high, feeding mold on sheathing and rafters.

Park Cities homes often have crawl spaces without vapor barriers. Dallas County's clay soil holds water, and humidity rises into the crawl space, causing mold on joists and subfloor.

High humidity and frequent AC use cause condensation on coils. If filters aren't changed, mold grows and spreads through ductwork.

Older plumbing in Highland Park homes can leak inside walls. Slow leaks soak drywall and insulation, creating hidden mold that spreads before you notice.
Signs it's time to call for mold remediation in Highland Park
Any one of these is worth a call.
Nothing picked yet. Tap the signs you have noticed and this box will sum them up.
Not listed? Call and we will tell you whether we can get to you.
Check my areaMold grows year-round in North Texas, but each season brings different risks. Here's what to expect and how to prepare.
Our Highland Park location lets us serve the entire Park Cities area and surrounding Dallas neighborhoods. Whether you're in Downtown Dallas or Lakewood, we can be there fast.
Straight answers to what people ask first.
We provide free estimates and work with your insurance.
We handle black mold removal, attic mold, crawl space mold, and HVAC mold. Call (214) 817 0145 for same-day service.
Call us anytime and we'll dispatch a technician immediately. We can set up containment and start drying within hours.
Most residential jobs take 2 to 5 days, depending on the extent of mold and the size of the area. Attic and crawl space jobs often finish in 2-3 days. We provide a timeline upfront and keep you updated daily.
Yes, we offer competitive pricing and free estimates. We also work with insurance to minimize your out-of-pocket costs.
If you see signs of mold or suspect hidden moisture, call Dallas Mold Remediation. We work with your insurance and provide clearance testing. Call (214) 817 0145 now.
Call (214) 817 0145 or email [email protected] to schedule an inspection. We answer the phone Monday through Friday, 8:00 AM to 6:00 PM, and we return after-hours messages first thing the next morning. Same-day inspections are available across Dallas County when you call before noon.