Irving Homes
We work in Irving homes from Las Colinas condos to South Irving bungalows. We protect floors and furniture and contain the work area.
- Las Colinas condos
- Valley Ranch homes
- South Irving bungalows
- Heritage District houses
Mold Remediation in Irving, TX Done Right
Mold Remediation in Irving means finding the moisture source first, then removing the growth and drying the structure so it does not return. We work Las Colinas high-rises, Valley Ranch homes, and South Irving rentals every week.
3102 Commerce St, Dallas, TX 75226, USA, Dallas, Texas
Serving Irving and nearby
- Written service plans
- Careful property protection
- One point of contact
- Prepared local crews
Mold Remediation in Irving You Can Count On
Dallas Mold Remediation has worked Irving since 2015, and we know this city block by block. Irving mold remediation TX customers call us for everything from attic growth in 1980s Valley Ranch homes to HVAC mold in Las Colinas high-rises.
The city sits in Dallas County with a mix of urban and suburban building stock, and our humidity runs high enough that a slow plumbing leak can turn into a full remediation job in under two weeks. We serve ZIP codes 75038, 75039, 75060, 75061, and 75062, and we treat every job the same way: find the water, stop it, contain the growth, and verify the air is clean before we pack up.
If you searched mold remediation near me Irving TX and got a call center, call us instead. You get a local crew that knows the difference between a Heritage District bungalow and a new Las Colinas condo.
Irving has a building mix that keeps us busy year-round. The Las Colinas Urban Center and Irving Convention Center area bring commercial and hospitality properties with complex HVAC systems, while older neighborhoods like South Irving and the Heritage District have homes with original plumbing and roof lines that leak. We also see a steady flow of apartment and condo work near Toyota Music Factory, where a single supply line failure can affect several units. That range, from high-rise mechanical rooms to 1950s pier-and-beam houses, is exactly the kind of work we built our Irving service around.
Good to know in Irving
High humidity and constant AC use
Irving's humidity stays high most of the year, and AC systems run almost constantly. That combination keeps condensate pans wet and ductwork cool, which is a perfect environment for mold growth.
Las Colinas
Las Colinas is a mix of high-rise condos, offices, and hotels around the Las Colinas Urban Center. Mold here usually starts with HVAC condensate leaks or plumbing failures in stacked units.
Older plumbing in South Irving and Heritage District
Homes built in the 1950s and 1960s often have galvanized or early copper plumbing that leaks slowly behind walls. By the time you see a stain, mold has been growing for weeks.
- Las Colinas
- Valley Ranch
- South Irving
- Hackberry Creek
Mold Remediation Services Available in Irving
Irving's mix of high-rises, mid-century homes, and rental properties means mold problems show up in different places depending on where you live.
Mold Inspection and Testing
We inspect Irving properties with thermal imaging cameras and moisture meters to find hidden growth behind drywall and under flooring.
Black Mold Removal
Black mold removal Irving TX jobs usually start with a visible stain or a musty smell.
Attic Mold Removal
Irving attics take a beating from summer heat and roof leaks. We see growth on sheathing and rafters in Valley Ranch and Hackberry Creek homes where ridge vents clog or shingles fail.
Crawl Space Mold Remediation
Older Irving homes in the Heritage District and South Irving often have pier-and-beam foundations with crawl spaces that stay damp.
Basement Mold Remediation
Basements are less common in Irving, but when they exist, they flood. We handle basement mold remediation for homes near the Elm Fork and for commercial properties with below-grade storage.
HVAC Mold Remediation
Irving's humidity and constant AC use make HVAC systems a common mold source. We inspect air handlers, ductwork, and drain pans in Las Colinas condos and Valley Ranch homes.
Drywall Mold Removal and Repair
When a supply line fails in an Irving apartment or a roof leak stains a ceiling, drywall is usually the first thing to go.
Air Duct Cleaning and Sanitization
If your Irving home smells musty when the AC kicks on, the ducts may be holding mold.
Antimicrobial Treatment
After we remove mold from an Irving property, we treat the remaining surfaces with antimicrobial spray and encapsulation coating. This stops regrowth on framing, joists, and concrete.
Commercial Mold Remediation
Irving's commercial properties, from Las Colinas offices to hotels near the Irving Convention Center, need mold work done without shutting down operations.
Residential Mold Remediation
Most of our Irving work is residential. We handle everything from a single bathroom to a whole-house job after a slab leak.
Apartment and Condo Mold Remediation
Irving has a lot of rental stock, and mold in one unit can affect neighbors.
How each service plays out in Irving
Pick a service to see how we approach it here.
Mold Inspection and Testing in Irving
In Irving, we inspect attics, crawl spaces, and HVAC closets where humidity hides. We use thermal imaging cameras and moisture meters to map wet areas before we cut. We document readings and explain what we find.
- Thermal imaging and moisture meters
- Attic, crawl space, HVAC checks
- Written findings and scope
More about Mold Inspection and Testing
See how Mold Inspection and Testing works
Black Mold Removal in Irving
Black mold in Irving often shows up after a slow leak or a flooded room. We contain the area with polyethylene sheeting and run a negative air machine. We remove affected material, treat framing, and HEPA vacuum the space.
- Containment with polyethylene sheeting
- Negative air machine running
- Framing treated and HEPA vacuumed
More about Black Mold Removal
See how Black Mold Removal works
Attic Mold Removal in Irving
Irving attics take heat and storm damage, and mold grows on sheathing fast. We remove affected sheathing and insulation, then treat the rafters. We also look for the roof leak that let the water in.
- Sheathing and insulation removed
- Rafters treated with antimicrobial
- Roof leak identified
More about Attic Mold Removal
See how Attic Mold Removal works
Crawl Space Mold Remediation in Irving
Older Irving homes often have damp crawl spaces under pier-and-beam foundations. We lay polyethylene sheeting over the soil and seal foundation vents. We treat joists and run a dehumidifier during the job.
- Polyethylene sheeting installed
- Foundation vents sealed
- Joists treated and dried
More about Crawl Space Mold Remediation
See how Crawl Space Mold Remediation works
Homes and businesses in Irving.
Irving homes and businesses need different access, scheduling, and containment plans.
Irving Businesses
We work with Irving property managers and business owners to schedule around operations. We contain work areas and keep tenants separated.
- Las Colinas offices
- Hotels near convention center
- Retail spaces
- Apartment complexes
Common Mold Problems in Irving
Irving's climate and building stock create a few recurring mold problems. High humidity, aging plumbing, and heavy AC use all play a role. Here are the four issues we see most often and how we handle them.
Attic mold from roof leaks and poor ventilation
Irving's summer heat and spring storms stress roofs. A small leak or clogged ridge vent lets moisture build in the attic, and mold grows on the sheathing within weeks.
HVAC mold from condensate and humidity
Irving's humidity keeps AC systems running hard. Condensate pans stay wet, and ductwork stays cool. That combination grows mold inside the system, which then blows into your living space.
Crawl space mold in older homes
Many South Irving and Heritage District homes have pier-and-beam foundations with crawl spaces that stay damp. Without a vapor barrier, ground moisture rises into the joists and subfloor.
Bathroom and kitchen mold from slow leaks
Supply lines and drain lines behind walls can drip for months before you notice. In Irving's older homes, galvanized and early copper pipes are common culprits. By the time you see a stain, mold has already taken hold.
Signs You Need Mold Remediation in Irving
Call us when you notice these signs in your Irving property.
Any one of these is worth a call.
Nothing picked yet. Tap the signs you have noticed and this box will sum them up.
Navigating Irving: Landmarks and Routes
Irving is easy to navigate once you know the landmarks. We use the Las Colinas Urban Center and the Irving Convention Center as our main orientation points for the north side. The Toyota Music Factory and the Mustangs of Las Colinas help us locate addresses near the Las Colinas business district.
Landmark
Las Colinas Urban Center
This is the core of the Las Colinas business and residential district. We use it to orient ourselves for condo and office calls in 75039.
Landmark
Irving Convention Center
The convention center sits in the Las Colinas area and is a useful reference point for commercial and hospitality jobs nearby.
Landmark
Toyota Music Factory
The Toyota Music Factory is a major entertainment complex in Las Colinas.
Landmark
Mustangs of Las Colinas
The Mustangs of Las Colinas sculpture is a well-known landmark in the Las Colinas Urban Center. It helps us locate addresses in the surrounding office and condo buildings.
Commercial area
Las Colinas Urban Center
This is Irving's main commercial district, with offices, hotels, and high-rise residential buildings. We handle mold work in mechanical rooms, tenant spaces, and common areas here.
Commercial area
Irving Convention Center district
The area around the convention center includes hotels and event venues. We work with property managers on HVAC and water intrusion issues in these buildings.
Transit
Dallas/Fort Worth International Airport (DFW)
DFW Airport sits on Irving's northwest border. We route around airport traffic via 114 and 635 when heading to Valley Ranch and Las Colinas.
Transit
President George Bush Turnpike (161)
The Bush Turnpike runs along Irving's east side and connects to 114 and I-35E. We use it for fast access to Las Colinas, Valley Ranch, and Hackberry Creek.
ZIP codes around Irving.
Not listed? Call and we will tell you whether we can get to you.
Check my area- 75063
- 75060
- 75038
- 75039
- 75062
- 75061
- 75014
- 75015
- 75016
- 75017
- 75059
- 75326
How Seasons Affect Mold in Irving
Irving's climate means mold can grow year-round, but the triggers change with the season. Spring storms, summer humidity, fall temperature swings, and winter heating all create different moisture problems. Here is what to expect and what to do.
Spring
- Spring brings heavy rain and storms to Irving. Roof leaks and foundation moisture are common. Attic and crawl space mold often shows up after a wet spring.
- Check your attic and crawl space after heavy rain. Look for water stains on sheathing and joists. If you see any, call for an inspection before the mold spreads.
Summer
- Summer heat and humidity keep AC systems running constantly. Condensate leaks and HVAC mold are the biggest issues. High humidity also slows drying after a leak.
- Change your AC filter monthly and check the condensate pan for standing water. If your system smells musty when it runs, schedule an HVAC inspection.
Fall
- Fall brings temperature swings and occasional rain. Roof leaks from summer storms may become visible as stains. Mold that started in summer can continue to grow if moisture is still present.
- Inspect your ceilings and walls for new stains. Clean gutters to prevent roof damage. If you had a leak earlier in the year, have the area checked for hidden mold.
Winter
- Winter is milder in Irving, but heating systems dry out the air and can mask moisture problems. Pipe leaks from freezing temperatures are less common but possible during hard freezes.
- Watch for condensation on windows and cold walls. If you see it, improve ventilation. After a freeze, check under sinks and in the attic for leaks.
Nearby Cities We Serve from Irving
Irving sits between Dallas and DFW Airport, which makes it a natural hub for our service area. We run crews from Irving into Dallas neighborhoods and surrounding cities daily. If you are in one of these areas, we can get to you quickly.
Mold Remediation in Irving: FAQs
Straight answers to what people ask first.
Commercial jobs are priced by square footage and access. We provide a written scope with pricing before we start, so you know the cost upfront.
Dallas Mold Remediation handles mold removal in Irving. We serve all Irving ZIP codes, including 75038, 75039, 75060, 75061, and 75062. Call us at (214) 817 0145 for a same-day inspection.
Yes, we run emergency mold remediation in Irving after hours and on weekends. If you have a burst pipe, roof leak, or flooded room, call us and we will schedule a crew as soon as possible. Most emergency calls are scheduled within 24 hours. We contain the area and start drying to limit the damage.
Most single-room jobs in Irving take one to three days. A full-home job can take five to ten days, depending on how much material is affected and how many rooms are involved. Commercial jobs are scheduled around your operations. We give you a timeline in the written scope before we start.
Yes, we offer same-day mold inspection in Irving when you call before noon. We inspect with a thermal imaging camera and moisture meter, and we check the attic, crawl space, and HVAC system. You get lab results and a written scope within 24 to 48 hours. Call (214) 817 0145 to schedule.
Get Mold Remediation in Irving Today
(214) 817 0145If you have mold in your Irving home or business, call us at (214) 817 0145. We serve all Irving ZIP codes, from Las Colinas to South Irving. We provide a written scope, containment, and a clearance check on every job.
Contact Dallas Mold Remediation
Call (214) 817 0145 or email [email protected] to schedule an inspection. We answer the phone Monday through Friday, 8:00 AM to 6:00 PM, and we return after-hours messages first thing the next morning. Same-day inspections are available across Dallas County when you call before noon.